Self-Regulating Heat Trace can be safely overlapped and insulated. Maximum energized temperature is 150°F, 3, 5, 8, 10, 15 Watts per inch, 120 and 240V available. Choose a cable that is moisture, chemical and explosion resistant.

• More Information

Self-Regulating Heat Trace can be Safely Overlapped and Insulated, maximum energized temperature is 250°F, 3, 5, 8, 10, 15 Watts per inch, 120 and 240V available. Choose a cable that is moisture and chemical resistant.

• More Information

General Purpose Constant-Wattage Cable (FE Series): An all-around good choice. Heats up to 400°F (204°C). This cable is made out of fluorocarbon film and has a TEFLON® Coating, giving it resistance to chemicals and moisture. A metallic braid is on the exterior to provide abrasion resistance and grounding for your safety. 3 to 12 watts per ft., 120 to 480 VAC.

• More Information

Harsh Environment Constant-Wattage Cable (KE Series): Has the ability to heat up to 500°F (260°C) due to its layer of Kapton®. An outer jacket of TEFLON® helps give it extra protection against chemical, moisture, and corrosive environments. This cable is designed for your TOUGH industrial environments. 4 to 12 watts per ft., 120 to 480 VAC.

• More Information

Kapton® / Fiberglass Constant-Wattage Cable (KM Series): Has the ability to heat up to 400°F (204°C) due to its layer of Kapton®. Designed for freeze protection, viscosity, and high temperature process control. KM heating cable is used in power plants, oil refineries, water treatment plants, food processing plants, and other locations where explosive environments can occur. 4 to 12 watts per ft., 120 to 480 VAC.

• More Information

High Temperature Constant-Wattage Cable (KK Series): Hottest flexible constant-wattage cable on the market! Heats up to 500°F (260°C). Equipped with two layers of Kapton®. This is for those serious about high temperature applications. 4 to 18 watts per ft., 120 to 480 VAC.

• More Information	• Heat Trace Application Guide
• Heat Trace Design Check List

Complete Self-regulating heat trace kit in 5, 10, 20, 50 and 100 ft. rolls with termination kit.

• More Information

NEMA 4 line-sensing thermostat, 0-400F, 22 amps on 120 -480 VAC, Explosion Resistant rated at 11 amps. 3ft. stainless steel capillary sensor.

• More Information RTBC

NEMA 4 ambient-sensing thermostat, 0-250F, 22 amps on 120 -480 VAC, Explosion Resistant rated at 11 amps. Sensor mounted to enclosure.

• More Information RTAS

Perfect for freeze protection applications and where precision is not as critical. Turns the heater on and off at a predesignated temperature. FM Approved thermostat can be used for sensing on a pipe or ambient. Choice of several temperature settings. Average precision of ±15°F (8°C),
up to 277 VAC, 25 Amp capacity. Can be Used Outdoors

• More Information TD

Great all-purpose temperature controller good for most of your industrial applications. Manually set your desired temperature. Choose between three separate temperature ranges, average Precision of ±5°F (3°C), up to 277 VAC, 22 Amp capacity, outdoor NEMA 3R enclosure, 100 ft. copper capillary sensor.

• More Information TB250N

Designed to sense ambient conditions. Manually set your desired temperature: Range of 20° to 110°F (-7° to 43°C). Precision: dependent on the variance between ambient and surface conditions when used for surface heating applications, up to 277VAC, 22 Amp capacity, outdoor rated NEMA 4X enclosure.

• More Information TB261N

Functions just like the all-purpose temperature controller. Choose between two separate temperature ranges, average precision of ±5°F (3°C), up to 480 VAC, 22 Amp capacity, explosion resistant (NEMA 7 and 9) and outdoor rated.

• More Information TB110N

NEMA 4 Power Connection terminal box, up to 3 heat trace cable inputs.

• More Information RTPC

NEMA 4 Splice / Tee Connection terminal box, up to 3 heat trace cable inputs.

• More Information RTST

NEMA 4 End Seal kit

• More Information RTES

Splice and Tee kit, 5 per package

• More Information RST

End Seal kit, 5 per package

• More Information ES

Connector / Termination kit for Self-Regulating Heat Trace

• Heating Cable Kit

• Heating Cable Accessories

2 mil (50µ) high strength aluminum foil coated with special cold weather acrylic adhesive system that combines superior quick stick at normal temperatures with superior low temperature performance at freezing. Specifications: Low Temperature Resistance: -35°F (-37°C) High Temperature Resistance: 260°F (127°C) . 2" wide x 50 yards.

• More Information Foil